Sculpting in glass has always been a very challenging and delicate form of sculpting simply because it is not an easy task to handle shards and making something out of these pieces. If one is an artist and would like a little challenge, then it is suggested that he try to make a glass sculpture Alberta. If he would want to but does not know where to start, then here are some ideas on how to.
In order to avoid any casualties while doing this, one will have to make sure that he is being covered at all times. This means that he has to wear some safety equipment as well as wear the proper clothing before he gets started. A list of things that he will be needing would be a pair of goggles, a small torch, a few graphite paddles, a kiln, and of course a pair of gloves.
So to start of, one should first put on his goggles and his gloves so that his hands and eyes will not get hurt. Some other things to wear in order to be protected would be some long sleeves and a short apron so that the shards will not go to the body. After all of this is done, then one may now on the torch and start with the building.
After the torch has been lit up, then the dangerous part will come because he will be playing with fire. What he should do is that he should point the torch a little bit at a small piece of glass shard and make sure that it melts just a little bit. If it is already quite soft, then one may actually manipulate it to create a ball.
The first thing that one should be creating would actually be the base of the figure. The base is one of the most important parts to create because this is the thing that will hold the figure so that it will not fall down. Use the balls of glass that was melted earlier on to create it and manipulate it with the graphite paddles.
Once the base has already been made, then one may now continue making the rest of the figure with a little bit more glass balls. To add to the figure, one can now use some tools and some other pieces in order to make the figure. The first thing to do would be to preheat the kiln until it is already quite hot.
Once the kiln has already been heated, then the next step would be to use some tweezers in order to manipulate the hot pieces of glass. While the tweezers are used for pulling the pieces to manipulate them, the graphite poles will be used once again to straighten the figure. When the figure has already been created, place it in the kiln for it to form.
When it is already done, one must put it on the kiln and slowly decrease the fire every hour by ninety degrees. This will allow the glass sculpture Alberta to harden and not crack. After it is already significantly hard, one may take it out of the kiln and just allow it to cool off.
In order to avoid any casualties while doing this, one will have to make sure that he is being covered at all times. This means that he has to wear some safety equipment as well as wear the proper clothing before he gets started. A list of things that he will be needing would be a pair of goggles, a small torch, a few graphite paddles, a kiln, and of course a pair of gloves.
So to start of, one should first put on his goggles and his gloves so that his hands and eyes will not get hurt. Some other things to wear in order to be protected would be some long sleeves and a short apron so that the shards will not go to the body. After all of this is done, then one may now on the torch and start with the building.
After the torch has been lit up, then the dangerous part will come because he will be playing with fire. What he should do is that he should point the torch a little bit at a small piece of glass shard and make sure that it melts just a little bit. If it is already quite soft, then one may actually manipulate it to create a ball.
The first thing that one should be creating would actually be the base of the figure. The base is one of the most important parts to create because this is the thing that will hold the figure so that it will not fall down. Use the balls of glass that was melted earlier on to create it and manipulate it with the graphite paddles.
Once the base has already been made, then one may now continue making the rest of the figure with a little bit more glass balls. To add to the figure, one can now use some tools and some other pieces in order to make the figure. The first thing to do would be to preheat the kiln until it is already quite hot.
Once the kiln has already been heated, then the next step would be to use some tweezers in order to manipulate the hot pieces of glass. While the tweezers are used for pulling the pieces to manipulate them, the graphite poles will be used once again to straighten the figure. When the figure has already been created, place it in the kiln for it to form.
When it is already done, one must put it on the kiln and slowly decrease the fire every hour by ninety degrees. This will allow the glass sculpture Alberta to harden and not crack. After it is already significantly hard, one may take it out of the kiln and just allow it to cool off.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about How To Make A Glass Sculpture Alberta
0 komentar:
Posting Komentar