The powder coating process has become very popular since it was introduced. It is a way of coloring and protecting metal surfaces without using the traditional liquid paint, which is prone to paint runs. Several powder coating Los Angeles contractors offer their services to help add protection and color to various metal surfaces. The powders coating process has several advantages. It produces a very good look and the end result is durable and very high quality.
The coat applied is thick and uniform, and a wide selection of different colors can be used in the process. The process also does not harm the environment. Since no solvent is needed to keep the binder and filler in liquid form, the process does not produce as much mess as traditional painting processes and eliminates paint runs. The powders used are also not poisonous or flammable.
The powdered material can also be manually dusted on the surface of a metal. Either way, once the surface is evenly coated, the object is cured. This is done by heating the object using either infrared light from a lamp or using an oven. The object is subjected to heat of about 190 degrees Celsius for about 10 to 15 minutes. Once done, the object is allowed to cool.
Powder coating contractors apply this method because it has many advantages. One, the coat process eliminates paint runs and produces a very thick and uniform coats. This is because no solvent is used to make the filler and binder liquid like in traditional paints.
After preparation comes the application. This is normally done using a special electrostatic gun. The gun positively charges the powders, which are sprayed toward the object that is grounded and negatively charged. Different nozzles are used on the gun depending on what type of surface is being painted and the consistency of the paint being used. The powders can also be applied by dusting them onto the surface manually.
Once the material is determined and the selection done, the base metal is thoroughly cleaned. The metal can be sanded to produce pits, which can make the powder to adhere to the surface more effectively. When the bare metal surface is exposed, the powders can be applied. This is normally done using an electrostatic gun.
The gun charges the particles positively. They are then accelerated towards the negatively charged metal surface. The small attraction between the charges makes the powdered particles to adhere to the surface of the metal. The powders can also be applied by lightly dusting them onto the surface of the metal. The curing process comes next.
Here, the object is heated using infrared light or an oven. Temperatures of 190 degrees Celsius are sustained for about 15 minutes and then the metal is allowed to cool. The metal at that point has a very beautiful and professional, high quality finish. Contacting contractors in your area to get a quality metal coat can help preserve the strength and look of the objects.
The coat applied is thick and uniform, and a wide selection of different colors can be used in the process. The process also does not harm the environment. Since no solvent is needed to keep the binder and filler in liquid form, the process does not produce as much mess as traditional painting processes and eliminates paint runs. The powders used are also not poisonous or flammable.
The powdered material can also be manually dusted on the surface of a metal. Either way, once the surface is evenly coated, the object is cured. This is done by heating the object using either infrared light from a lamp or using an oven. The object is subjected to heat of about 190 degrees Celsius for about 10 to 15 minutes. Once done, the object is allowed to cool.
Powder coating contractors apply this method because it has many advantages. One, the coat process eliminates paint runs and produces a very thick and uniform coats. This is because no solvent is used to make the filler and binder liquid like in traditional paints.
After preparation comes the application. This is normally done using a special electrostatic gun. The gun positively charges the powders, which are sprayed toward the object that is grounded and negatively charged. Different nozzles are used on the gun depending on what type of surface is being painted and the consistency of the paint being used. The powders can also be applied by dusting them onto the surface manually.
Once the material is determined and the selection done, the base metal is thoroughly cleaned. The metal can be sanded to produce pits, which can make the powder to adhere to the surface more effectively. When the bare metal surface is exposed, the powders can be applied. This is normally done using an electrostatic gun.
The gun charges the particles positively. They are then accelerated towards the negatively charged metal surface. The small attraction between the charges makes the powdered particles to adhere to the surface of the metal. The powders can also be applied by lightly dusting them onto the surface of the metal. The curing process comes next.
Here, the object is heated using infrared light or an oven. Temperatures of 190 degrees Celsius are sustained for about 15 minutes and then the metal is allowed to cool. The metal at that point has a very beautiful and professional, high quality finish. Contacting contractors in your area to get a quality metal coat can help preserve the strength and look of the objects.
About the Author:
Read more about Hire Powder Coating Los Angeles Contractors For Quality Metal Coloring.
0 komentar:
Posting Komentar