Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Lengthen the cable for as long as you can. You simply do not have the luxury of time to make another purchase again. Moreover, always wear gloves even when you are just cutting the cable. This can keep you from being electrocuted and getting burned once you get to the fitting stage of the procedure.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Follow the adjustments you have to make to pass the SWR meter. This process may be tiring but this can keep you safe as you fight with the most notorious terrorists in the world. So, play by the book and only get out in the field once you already have the approval of your leader.
Close the cover once you pass the meter. Prevent the wires from being exposed by tightening the screws. You can even put a protective tape on the lid for you to have a smooth ride and get back to the people you love at home.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Lengthen the cable for as long as you can. You simply do not have the luxury of time to make another purchase again. Moreover, always wear gloves even when you are just cutting the cable. This can keep you from being electrocuted and getting burned once you get to the fitting stage of the procedure.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Follow the adjustments you have to make to pass the SWR meter. This process may be tiring but this can keep you safe as you fight with the most notorious terrorists in the world. So, play by the book and only get out in the field once you already have the approval of your leader.
Close the cover once you pass the meter. Prevent the wires from being exposed by tightening the screws. You can even put a protective tape on the lid for you to have a smooth ride and get back to the people you love at home.
0 komentar:
Posting Komentar