The burrowing rodents are some of the most destructive and harmful pests that every home owner has to deal with. You will not be able to see these pests in the garden because they spend most of their time under the ground. These pests destroy the gardens and lawns by forming a great network of burrows and tunnels. If your garden is being destroyed by the pests, you have the option of hiring a professional to get rid of the rodents or doing it on your own. If you prefer getting rid of these pests on your own without the help of a professional, here is a simple guide on how to trap a gopher that you can use to get rid of them.
Trapping a rodent requires one to focus on those fresh mounds that are in the lawn. You will waste so much time if you focus on the vacant mounds. It is advisable that you inspect the garden for any new activity of these pests. It might be very hard for you to spot new activities when it is raining. In this case, you need to look at the mounds in the garden to see if there is wet dirt or grass pushed over by the pests. It is possible for you to spot a new mound that was not in your lawn before.
You can then proceed to locate the tunnel that is used by these rodents. This is not an easy task and you need to dig deep into the ground around the fresh mound. Tunnels can easily be identified through the sticking of probes in the ground near the mound. This activity requires patience as you might need to do this many times before feeling the tunnel. Digging a very big hole around the mound will allow you to easily locate the tunnel.
After digging a large hole around the area, you need to ensure that the tunnels are uncovered. All the tunnels need to be cleared to ensure they are wide open. You should push your hand through the tunnel to clear out the dirt. Always ensure that you fill back the bottom of the hole to be on the same level as the tunnel.
At this point, you can place the snare leaving very little room for the rodent to side step it. After placing the snare in its place, you should secure it with a safety line to prevent the injured rodents from running away with the snare. Cover the whole using an object that will prevent light from entering into it.
There is nothing else that you can do at this point other than waiting for the rodents to be trapped in the snares. This can last from few minutes to several hours. Ensure that you check on the traps at least twice a day. If you discover any trapped rodent, you should bury it in the same hole that you set the snare.
Finding the hole filled up after setting the snare should not come as a surprise to you. It is possible that the rodent has many tunnels and you only located one tunnel. In this case, you should dig up the whole slowly before pulling out your snare. A shovel should not be used in this case because it can destroy the traps.
If you are having these pests in your garden, you should not waste your time shopping for repellents and other poisonous substances that can expose you and your family to dangerous chemicals. You can easily set a snare to catch these rodents and completely eliminate them from the garden.
Trapping a rodent requires one to focus on those fresh mounds that are in the lawn. You will waste so much time if you focus on the vacant mounds. It is advisable that you inspect the garden for any new activity of these pests. It might be very hard for you to spot new activities when it is raining. In this case, you need to look at the mounds in the garden to see if there is wet dirt or grass pushed over by the pests. It is possible for you to spot a new mound that was not in your lawn before.
You can then proceed to locate the tunnel that is used by these rodents. This is not an easy task and you need to dig deep into the ground around the fresh mound. Tunnels can easily be identified through the sticking of probes in the ground near the mound. This activity requires patience as you might need to do this many times before feeling the tunnel. Digging a very big hole around the mound will allow you to easily locate the tunnel.
After digging a large hole around the area, you need to ensure that the tunnels are uncovered. All the tunnels need to be cleared to ensure they are wide open. You should push your hand through the tunnel to clear out the dirt. Always ensure that you fill back the bottom of the hole to be on the same level as the tunnel.
At this point, you can place the snare leaving very little room for the rodent to side step it. After placing the snare in its place, you should secure it with a safety line to prevent the injured rodents from running away with the snare. Cover the whole using an object that will prevent light from entering into it.
There is nothing else that you can do at this point other than waiting for the rodents to be trapped in the snares. This can last from few minutes to several hours. Ensure that you check on the traps at least twice a day. If you discover any trapped rodent, you should bury it in the same hole that you set the snare.
Finding the hole filled up after setting the snare should not come as a surprise to you. It is possible that the rodent has many tunnels and you only located one tunnel. In this case, you should dig up the whole slowly before pulling out your snare. A shovel should not be used in this case because it can destroy the traps.
If you are having these pests in your garden, you should not waste your time shopping for repellents and other poisonous substances that can expose you and your family to dangerous chemicals. You can easily set a snare to catch these rodents and completely eliminate them from the garden.
About the Author:
Get tips on how to trap a gopher using an easy and effective solution. You can find out lots of information online from http://www.traplineproducts.com/pestidguide.html.
0 komentar:
Posting Komentar