Dry ice blasting is a special kind of blasting operation that involves the use of carbon dioxide gas in solid form. The gas is placed under pressure and low temperature in order to convert it to solid form. The cleaning process makes use of a combination of three main aspects. These aspects are sublimation, extreme temperature change, and kinetic energy. When in need of Dry Ice Blasting Pittsburgh should be visited.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
There are a number of reasons which make many individuals prefer dry ice blasting over other blasting techniques. Among the reasons is that dry ice is a non-toxic abrasive substance which has no environmental degradation aspects. The EPA has approved the use of this substance in the United States owing to the fact that it is a non-pollutant.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
There are safety concerns that are associated with using this method to clean surfaces. First, the pellets used for cleaning are usually propelled at a high speed. This often makes them dangerous to people and animals. As a rule of thumb, it is advisable to never point the gun at surfaces that are not being cleaned. The gun should also never be pointed at people or animals.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
There are a number of reasons which make many individuals prefer dry ice blasting over other blasting techniques. Among the reasons is that dry ice is a non-toxic abrasive substance which has no environmental degradation aspects. The EPA has approved the use of this substance in the United States owing to the fact that it is a non-pollutant.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
There are safety concerns that are associated with using this method to clean surfaces. First, the pellets used for cleaning are usually propelled at a high speed. This often makes them dangerous to people and animals. As a rule of thumb, it is advisable to never point the gun at surfaces that are not being cleaned. The gun should also never be pointed at people or animals.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
About the Author:
You can find a list of the benefits and advantages of using professional dry ice blasting Pittsburgh services at http://www.asmenvironmental.com right now.
0 komentar:
Posting Komentar